Alignment Hoists by BendPak

HDS-14LSXE

SKU# 5175172

6,350-kg. Capacity / Alignment Hoist / Limo Extended / Includes Turnplates and Slip Plates


The HDS14LSXE alignment hoist is the "limo style" version of the HDS14LSX. Compared to the standard length version, this hoist extends the overall length of the hoist, as well as the runways, by 762 mm. This significant increase makes it possible to load longer cars, trucks, SUVs and even some limousines.

HDS-14LSXE Extended Four-Post Alignment Hoist by BendPak
User Manual Download
Sales Sheet Download
Warranty Download

Extended-Length Alignment Hoist Offers 6,350-kg. of Power

This model is essential for hundreds, if not thousands, of shops across the country. Busy bays are going to service a variety of vehicles, and depending where you work, you're likely to get some exceptionally big vehicles in need of alignment services. This model all but guarantees you'll be ready to handle anything. With a 6,350-kg. capacity, the HD14SLXE hoists virtually all residential vehicles, from sedans to heavy-duty pick-up trucks to municipal vehicles and farming equipment.

Slip plates

Turn plates in the front and multi-caster slip plates in the back allow for perfectly precise, free-floating alignments.

Deluxe Turnplates

Aluminum-alloy construction turn plates are easily positioned using BendPak’s turn plate pockets. Larger and more robust than our previous slip-plate design, they're also lighter in construction and feature dual "popsicle gap stops" for your convenience. Angled steel lock pins conveniently hold the plate in place when you want to use your machine strictly as a maintenance or storage hoist.

Dual-hub cable sheaves

To increase longevity, ensure low cost of ownership and keep your purchase low-maintenance over time, we use the biggest and best sheaves throughout the ​hoist. Massive ​267 mm diameter cable sheaves are held within the runway cross tubes, outfitted with 57 mm diameter sheave axles that are equally durable.

Heavy-duty aircraft cable

These cables are meant to be used continuously for years on end without issue. They're extremely resistant to rubbing and other abrasions (e.g., weather, chemicals, hydraulic oil). A 13 mm diameter 6 x 25 aircraft-quality stainless-steel hoisting cable runs through each column.

Adjustable height locking positions

No need to reach or bend for the turn plates. Every few inches, a convenient built-in safety lock will let the runways auto-engage into the post. All locks engage simultaneously as the runways evenly ascend the columns.

Built-in lubrication

Grease fittings make it easy to focus on the alignment of your wheels without worrying about the constant lubrication of the sheaves.

Flow restrictor

You'll probably never experience a hose rupture, but we have you covered just in case. BendPak's unique hydraulic flow divider provides a smooth descent, making your alignment hoist structure safe to operate at all times.

Spring-loaded safety locks

As the alignment hoist runways rise to your preferred service level, springs "snap" and hold the locks into place at each ladder position. The spring-loaded, multi-locking devices are adjustable. The design also compensates for slight slopes in your garage.

Push-button pneumatic lock release

A simple push-button pneumatic lock release simplifies lowering operations. Stainless steel and aluminum pneumatic cylinders provide years of maintenance-free service.

Secondary lock system

BendPak doesn't cut corners on safety, even going above and beyond required safety standards. We offer a slack-cable lock system as a backup safety mechanism that’s ready at all times to shut off the alignment hoist in the development of dangerous cable slack.

Integrated design

The cables, sheaves, airlines and hydraulic cylinder run within the ​hoist structure. This congregation of high safety and improved aesthetics gives our hoists a highly distinguished look that also increases user safety and comfort.

Electric-hydraulic power system

The zero-maintenance power system features ergonomically located controls for easy operator access during repetitive daily use.

Longer approach ramps

Longer ramps make it easier to load low ground-clearance vehicles onto the car hoist structure. Alignments on these vehicle types are no hassle, and of course, larger trucks and SUVs can glide on just as easily as low ground-clearance sports cars.

Flexible protective conduit

An extra-tough yet flexible conduit protects all airlines and hydraulic hoses from daily wear. You'll handle your alignment hoist with greater confidence knowing the cables won’t deliver sudden shocks, ruptures or fluid leaks.

Rolling jacking beam

Convert your four-post into a fully functional wheel service ​hoist. Optional rolling jacking beams make a great addition and increase service capacity. Bridge jacks raise vehicles by the frame, so wheel and brake service can be performed without moving the vehicle to a different car ​hoist. Telescoping arms and frame contact pads extend over runways and target the vehicle's hoisting points. Runways are fully adjustable for different tread widths. Three locking positions offer additional operator control.

Features

  • 6,350-kg. hoisting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493.
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Runways include rail‐kit for optional accessories
  • Electric/hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal “Anti-Sway” slider blocks in each column
  • Features oversize sheaves and heavy‐duty 13 mm aircraft cable
  • Rugged 25 mm roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths
  • Optional 3,175-kg. capacity ​jacking beams available (Model R​BJ7000)

HDS-14LSXE Specifications

HDS-14LSXE specs diagram

Capacity

Lifting Capacity*
14000
*Max Capacity / Front Axle
7000
*Max Capacity / Rear Axle
7000

Rise

A - Min. Runway Height:
7.625
B - Max. Rise:
70
C - Max. Lifting Height:
77.625
Time to Full Rise:
60 seconds

Outside Dimensions

D - Overall Width:
130
E - Outside Length:
243
F - Overall Length:
271
G - Height of Columns:
93

Inside Dimensions

H - Width Between Columns:
120
I - Drive-Thru Clearance:
97

Runways

J - Runway Width:
20
K - Length of Runways:
229
L - Width Between Runways:
37.5 or 51

Alignment

M - Min. 4-Wheel Alignment:
89
N - Max. 4-Wheel Alignment:
156
O - Max. 2-Wheel Alignment:
212

Minimum Wheelbase

Rated Capacity:
165
75% Capacity:
140
50% Capacity:
115
25% Capacity:
95

Locking

Locking Positions:
13
Lock Spacing:
4

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Shipping

Weight:
1,475 kg (3,252 lbs.)
Dimensions:
6,121 mm x 584 mm x 1,143 mm (241" x 23" x 45")

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Note: Not all BendPak hoist models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.